Material Safety Data Sheets (MSDS)

SUBJECT: SAFETY DATA SHEETS (MSDS)
ORGIN: Moldex Technical Services Department
DATE: January 16, 1999
REVIEWED: July 2015

Overview

Safety Data Sheets (SDSs), formerly referred to as Material Safety Data Sheets (MSDSs) are required for chemicals and related items as set forth in OSHA’s Hazard Communication Standard (1910.1200).

All items manufactured by Moldex-Metric Inc. are considered “Articles” (not chemicals) and therefore do not require SDS sheets.

Hazard Communication – 1910.1200: https://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10099


WARNING
: The information contained in this Tech Brief is dated and was accurate to the best of Moldex’s knowledge, on the date above. It is not meant to be comprehensive, nor is it intended to be used in place of the warning/use instructions that accompany Moldex respirators. Outside of the USA, check with all applicable and local government regulations.

©2003-2009 Moldex-Metric, Inc. All Rights Reserved.

Scroll to top