SUBJECT: MOLDEX® RESPIRATORY AND HEARING PROTECTION GUIDE FOR FLOOD RESPONSE WORK, RECOVERY & CLEAN-UP
ORGIN: Moldex Technical Services Department
DATE: September, 2005
REVIEWED/UPDATED: March 2010
Moldex® manufactures a broad range of both Respiratory and Hearing protection products that may be suitable for recovery and clean-up operations in response to flood related damages.
Mold, nuisance odors, particulates and other toxic substances will likely be present. It is important that before either respiratory or hearing protection can be selected that proper hazard assessment be performed by an onsite Industrial Hygienist or other appropriate Safety Professional.
Moldex® Respiratory Solution
Moldex® has a full complement of respirators ranging from N95 disposables such as the 2200N95, 2700N95, the 2800 series (for the accompanying nuisance odors), N100 such as 2730N100 and 2360P100 series, the 8000 series with P100 filters, or 8000 series with 8100 Organic Vapor cartridges piggybacked with P100 filters. Please refer to OSHA 29 CFR 1910.134.
Common Noisy Environments
Machinery such as chain saws, cutting equipment, grinding operations and heavy equipment operators
Moldex® Hearing Solution
Moldex® has a full complement of hearing protection devices for most noise environments. Such as our disposable foam earplugs plugs that range in NRR from 22 to 33 to our earmuffs with NRRs from 24 to 29. Please refer to OSHA 29 CFR 1910.95.
Affected Industries & Individuals
Response workers, emergency personnel, medical staff, abatement and contractors
WARNING: The information contained in this Tech Brief is dated and was accurate to the best of Moldex’s knowledge, on the date above. It is not meant to be comprehensive, nor is it intended to be used in place of the warning/use instructions that accompany Moldex respirators. Outside of the USA, check with all applicable and local government regulations.
©2003-2010 Moldex-Metric, Inc. All Rights Reserved.